Magazine pouches

Active filters

M-Tac elastic pouch for 1 magazine Elite MOLLE
Pristatymas 2-3 d.d
With their unique design, the elastic pouch by M-Tac securely holds the magazine, it does not fall out under any circumstances, not even when skydiving or in upside down position. But as soon as you make an effort to take out the magazine, it is right there in your hand, since the grip surface remains accessible to you when the magazine is in the pouch. This significantly speeds up reloading and enables you to act faster and in a more efficient way. Material: Cordura 500D Due to its unique qualities, Cordura is widely used in tactical equipment of the military, law enforcement and special forces. 
M-Tac Pistol Mag Pouch "Kolchan" MOLLE
Pristatymas 2-3 d.d
M-Tac Pistol Mag Pouch "Kolchan" was created in collaboration with Balistyka. Made of high-quality fabric Cordura 1000D - high durability fabrics, resistant to abrasion and heavy loads. The side walls are inserts made of impact-resistant plastic, thanks to which the magazine is attached. The MOLLE system is located on the front panel, which allows you to connect additional equipment. This model is compatible with almost all pistol magazines Glock, CZ, HK, PM and others. The compact size allows you to easily place on the equipment three or more pistol pouches depending on the size of a plate carrier or a bulletproof vest. The "Quiver" pistol mag will provide a quick recharge and will be a great addition to an individual set of equipment for a fighter.
M-Tac Mag pouch "Kolchan" for AK/AR mini MOLLE
Pristatymas 2-3 d.d
The M-TAC Mini Pouch is a functional item of equipment designed for reliable fixing and carrying the magazine. Made of high-quality fabric Cordura 1000D - high durability fabrics, resistant to abrasion and heavy loads. The side walls are inserts made of impact-resistant plastic, thanks to which the magazine is attached. The MOLLE system is located on the front panel, which allows you to connect additional equipment. This model is compatible with AK and AR type magazines. The shortened height of the pouch means that most of the magazine remains open, which significantly speeds up its recharging. The mini "Quiver" easily attached to equipment or a tactical belt and is perfect for all fans of sport shooting.
M-Tac PCC Mag Pouch "Kolchan" MOLLE
Pristatymas 2-3 d.d
M-Taс mag pouch PCC “Kolchan” was created in collaboration with Balistyka. Made of high quality Cordura 1000D material - high-strength fabric, resistant to abrasion and high loads. The side walls are inserts made of impact-resistant plastic, thanks to which the magazine is fixed. The MOLLE system is located on the front panel, which allows you to attach additional equipment. The "Quiver" RCC will provide a quick recharge and will be a great addition to the individual set of equipment for a fighter
M-Tac Mag pouch "Kolchan" for AK/AR MOLLE
Pristatymas 2-3 d.d
M-Taс mag pouch “Kolchan” was created in collaboration with Balistyka. Made of high-quality fabric Cordura 1000D - high durability fabrics, resistant to abrasion and heavy loads. The side walls are inserts made of impact-resistant plastic, thanks to which the magazine is attached. The MOLLE system is located on the front panel, which allows you to connect additional equipment. This model is compatible with AK-47, AKM, AK74 and AR type magazines. Compact size allows you to easily place three or more pouches on the equipment, depending on the size of a plate carrier or a bulletproof vest. The Quiver will provide a quick recharge and will be a great addition to an individual set of equipment for a fighter.
M-Tac magazine pouch with elastic band (10 cm) Laser Cut MOLLE
Pristatymas iki 15 d.d
M-Tac result for the store elastic (10 cm) Laser Cut. A very compact thing for AR 15 series stores, made with the latest technology. It consists of two parts: an insert with Kydex, which allows you to securely hold the store, and the result with elastic side inserts. This design allows you to maximize the angles at which you can insert or remove the store. On the front surface, MOLLE mounts are made using modern Laser Cut technology to attach additional small results (for example, under a grenade or a pistol magazine). Materials: Сordura
M-Tac Mag drop pouch Elite MOLLE
Pristatymas iki 15 d.d
The bag is intended for blind replacement of mags in case of emergency reloading of the weapon. The special design prevents mags and other equipment from falling out of the bag. The neck of the bag is equipped with a quick release system, which, if necessary, allows you to quickly and tightly close the bag. Fastening - possible with  the Molle system or with usual hips.
Material: Cordura 1000D
Tape straps: TEXEL
Dimensions: height - 24 cm, width - 19 cm, depth - 10 cm
M-Tac Pouch Elastic Triple Magazine Elite Laser Cut
Pristatymas iki 15 d.d
The Elite Laser Cut Triple Magazine Elastic Pouch is a functional piece of equipment designed to securely hold and transport AK/AR series magazines. Made of high-quality Cordura 500D, a super-strong fabric, resistant to abrasion and high loads. Reliable attachment is provided by a strap and an elastic cord, which guarantee protection against falling out. This model is designed to accommodate and conveniently transport three magazines. Easily attaches to equipment with a MOLLE interface, made from a polymer composite using laser cut technology. The pouch will allow for quick reloading and become an essential element of a fighter's individual equipment. Material: Cordura 500D
M-Tac Pouch Double Magazine Closure Fastex
Pristatymas iki 15 d.d
The Double Magazine Pouch from M-Tac is a functional piece of equipment designed to securely hold and transport AR/AK series magazines. The main part of the pouch is made of high-quality Сordura 500D, a super-strong fabric, resistant to abrasion and high loads. The flap cover and MOLLE interface, made using laser cut technology, are of the innovative Cordura Squadron material. The elasticated nylon inner side walls allow easy removal of magazines from the pouch. This model is a compact size which allows you to easily place three or more pouches on your equipment, depending on the size of plate carrier or body armor. The M-T
M-Tac Pouch for AK/AR Open Double Laser Cut
Pristatymas iki 15 d.d
This practical and easy-to-open M-Tac pouch will enable you to use magazines as quickly and conveniently as possible during training or performing combat tasks. It is made of Cordura 500D - an ultra-durable fabric that is resistant to abrasion and high loads. The pouch makes it possible to place two of the AR or AK magazines. The well-thought-out design reliably secures the magazines and stops them from falling out during active movements. The front MOLLE interface is made by Laser Cut technology and allows you to attach additional equipment. The sides made of nylon webbing allow the magazines to be easily removed from the pouch. Attaches to equipment using the MOLLE interface. The total volume is adjusted by an elastic cord and a toggle at the bottom of the pouch. Fastening system: MOLLE
M-Tac Pouch for M249 Cartridge Box Closed
Pristatymas iki 15 d.d
The M-Tac closed pouch for the M249 cartridge box (for 200 cartridges) enables you to conveniently carry and quickly use the box during combat tasks. Made of high-quality Cordura 500D material - a super-strong fabric, resistant to abrasion and high loads. The box is securely fixed with an elastic strap and a flap fastened with velcro. Inside the pouch the designers have provided nylon straps on the sides so that the box can be easily removed. Attaches to equipment using the MOLLE interface, made using Laser Cut technology. This product is not compatible with soft boxes and boxes for other models of machine guns. Material: Cordura 500D Features: Flap fastened with velcro Internal nylon straps on the sides The Molle interface is made by Laser Cut technology