Taktiniai diržai, petnešos

Taktinis diržas Assault Tactical Belt-4 su 6 mm Air Mesh 3-D vidiniu tinkleliu. Diržas komplektuojamas su standžiu 50 mm pločio vidiniu diržu.
Sagtis turi penkių taškų užsegimo sistemą, kuri apsaugo nuo netyčinio atsisegimo.
Diržas turi papildomus tvirtinimo elementus, skirtus montuoti modulinę kirkšnies apsaugą (parduodama atskirai).
Diržas gali būti komplektuojamas su 1, 1A arba 2 klasės balistiniais paketais.

Ypatybės:
medžiaga Cordura;
sagtis: 2M (Italija);
ilgis: iki 145 cm.

M-Tac pistoleto diržas yra universalus ir praktiškas įrankis, sukurtas iš nailono su plastikine sagtimi. Šis diržas suteikia galimybę atsegti sagtį viena ranka, teoriškai leidžiant sužeistam kariui savarankiškai atsikratyti nereikalingų įrankių.
Diržas taip pat gali būti naudojamas kaip paprastas diržas, tačiau jis yra šiek tiek platesnis nei įprasti kelnių diržai, turintis plotį 5,5 cm. Prieš perkant, rekomenduojama pasitikrinti kelnių kilpų dydį, kad užtikrintumėte tinkamą prigludimą.
Medžiaga: 100% poliesteris
Diržo plotis: 5,5 cm
Šis diržas yra patikimas pasirinkimas tiek kasdieniam naudojimui, tiek taktinėse situacijose.

M-Tac taktinės petnešos Laser Cut yra skirtos tvirtinti prie taktinio diržo ir žymiai padidina komfortą nešiojant didelį kiekį įrangos.
Petnešos pagamintos iš Cordura Squadron naudojant Laser Cut technologiją. Ant petnešų integruota MOLLE sąsaja, kuri leidžia pritvirtinti papildomą įrangą.
Jų ilgis reguliuojamas specialių sagčių pagalba, kurios leidžia reguliuoti diržą į tokį aukštį, koks bus patogus naudoti. M-Tac taktinės petnešos Laser Cut  turi 4 tvirtinimo taškus tolygiai paskirstyti apkrovą ant pečių. Jie taip pat padeda suteikti papildomą atramą diržui, kai įranga smarkiai išsikiša.
Šis modelis yra dviejų dydžių: Long ir Regular.

MIWO-MILLTARY taktinis diržas su žemo profilio, paminkštintomis petnešomis.
Pagamintas iš Corduro 770 audinio. Tiek prie diržo, tiek prie petnešų priekinės dalies galima tvirtinti krepšelius, dėklus ir kitą įrangą (MOLLE tvirtinimo sistema). 
Spalva: Ranger Green
Medžiaga: Cordura 770D
Diržo plotis: 11 cm
6 petnešų tvirtinimo taškai
Reguliuojamas diržo ilgis: 90-120cm;
MOLLE tvirtinimo sistemos ilgis:

M - 90 cm
L - 101 cm

The tactical belt “War Belt Armor” from M-Ta? is an important element of a modern fighter’s equipment. This model allows you to combine an individual unloading system for specific combat tasks. War Belt Armor is made of Cordura 500D, a durable material resistant to abrasion and high loads. Pouches are easily attached to the belt using the MOLLE interface made of MIL-SPEC webbing. The belt fastens with a buckle from Woojin, the world leader in the production of accessories. In this model, the designers have provided a special pocket where the belt can be adjusted to size using internal straps. The damping mesh on the inside reduces the possibility of pressure and provides good ventilation. Due to its anatomical shape, the tactical belt does not fall off during active movement or in combat conditions. War Belt Armor can also optionally be equipped with a class 1A ballistic package inside the belt, which will reliably protect against ricochets and fragments (not included). Also, shoulder straps can be attached to this model and the belt can be used as a relief belt-shoulder system (not included). War Belt Armor is a great option for carrying the bare minimum gear you39;ll need in a combat situation. Material: Cordura 500D Webbing: MIL-SPEC Hardware: YKK / WJ Features: - It is possible to complete with a class 1A ballistic package in the ARMOR tactical belt - You can attach shoulder straps (not included) - Damping mesh on the inside - Adjustable in size with the help of internal straps. Due to its unique properties, Cordura is widely used in tactical equipment for the military, law enforcement and special forces.This material commonly comes in linear density of 1000d and 500d. Linear density is the ratio of the mass of thread to its length. It is measured in Denier. This un

M-Tac shoulder straps are designed to attach to a tactical belt and can significantly increase the comfort of the belt. They are made from dense MIL-SPEC webbing and are adjustable in length with buckles. This allows the belt to be adjusted to a comfortable height during use. The shoulder straps have 4 attachment points to evenly distribute the load on the shoulders. This also helps to provide additional support when using heavier harnesses on the belt. The Elite tactical belt shoulder straps are sure to be of interest to fans of modern tactical equipment.

Shoulder straps from M-Tac are designed to be attached to a tactical belt and can significantly increase comfort when carrying a large amount of equipment. The straps are made of Cordura Squadron using Laser Cut technology. On the straps, the designers of the brand provided a MOLLE interface, which makes it possible to attach additional gear. They are adjustable in length with the help of special buckles that allow you to adjust the belt to a height that will be convenient for use. The shoulder straps have 4 attachment points for an even distribution of the load on the shoulders. They also help to provide additional support for the belt when the equipment is heavily overhanging. Please note that this model is available in two sizes: Long and Regular.

M-Tac has developed and released the innovative War Belt Tiger D-Ring Cobra tactical belt, which allows you to combine an individual carrying system for specific combat tasks. The belt is made of Cordura Squadron - a super-strong fabric that is resistant to abrasion and high loads. The design feature of this model is a rigid insert made of high-tech Tegris thermoplastic composite using Laser Cut technology and lined with Cordura Squadron. The revolutionary material Tegris from the company Milliken® (USA) is lighter than traditional thermoplastic composites, but at the same time is able to withstand a high load. The belt is light and allows you to conveniently attach MOLLE compatible gear. Pouches can be fastened either by pulling the straps through Cordura Squadron (this will be an easier and faster fastening option) or through Tegris (this option provides a more rigid fastening). In this model, the designers provided a special pocket, where the size of the belt can be adjusted using the internal straps. Also, War Belt Tiger D-Ring Cobra can optionally be equipped with a Class 1 or Class 2 ballistic package in the tactical ARMOR belt, which will protect against ricochets and shrapnel (not included). The belt fastens with a 25 mm Cobra buckle from the Austrian manufacturer Austrialpin. The buckle is equipped with an emergency safety ring. The product is resistant to abrasion, mechanical damage and is reliable even in extreme conditions. The padded mesh inside reduces the possibility of uneven pressure and provides good ventilation. Four additional buckles allow you to attach shoulder straps and use the belt as part of a relief belt-shoulder system (not included). The belt is available in sizes from XS/S to 3XL. Material: Cordura Squadron Furniture: YKK / WJ Features: can

The WAR BELT ARMOR TEGRIS D-RING COBRA MULTICAM tactical belt from M-Tac is an important element of the equipment of a modern fighter. This model can be combined with an individual loading system to perform specific combat tasks. WAR BELT ARMOR TEGRIS D-RING COBRA MULTICAM is made of Cordura 500D - a durable material resistant to abrasion and high loads. Pouches are easily attached to the belt using a MOLLE interface made of MIL-SPEC webbing. The belt fastens with the original COBRA aluminum buckle, which was developed by the Austrian company AustriAlpin. In this model the buckle is attached with reinforced webbing. A distinctive feature of this model from the previous one is the use of inserts (side and central) made of high-tech Tegris thermoplastic composite from the Milliken® company. This material is lighter than traditional thermoplastic composites, yet able to withstand heavy loads and protect against impacts or minor debris . Also, in this model, the designers provided a special pocket, where you can adjust the belt size using internal straps. The padded mesh on the inside reduces uneven pressure and provides good ventilation. Thanks to the anatomic cut, the tactical belt stays in place during active movement or in combat conditions. The WAR BELT ARMOR TEGRIS D-RING COBRA MULTICAM can optionally be equipped with a Class 1 or Class 2 ballistic package in the tactical ARMOR belt, which will protect against ricochets and shrapnel (not included). Also, the belt is equipped with 4 buckles for fastening additional shoulder straps (not included). This way the the belt can be used as an loading belt-shoulder system. War Belt Armor is a great option for carrying the bare minimum gear you39;ll need in a combat situation. Material: Cordura 500D Additionally: AustriAlpin /

The military-tactical Range Belt Cobra Buckle Gen.IV is ideal for military personnel, law enforcement officers and anyone who leads an active lifestyle. This model can also be used as a pistol belt. It will be quite appropriate at shooting ranges - you can attach the pouches for spare magazines, walkie-talkies, first aid kits, covers for lanterns, knives, etc. to the belt. The Range Belt Cobra Buckle Gen.IV is two-fold - it consists of an inner and outer (rigid) belt with the possibility of size adjustment. The inner strap is made of thin webbing (40 mm) with an outer velcro. Adjustable in size with WJ buckle, for fixation and anti-slip. The outer strap consists of nylon straps (50 mm), between which is sewn a high-tech thermoplastic composite Tegris, which provides rigidity. The revolutionary material Tegris from the company Milliken® (USA) has less weight than traditional thermoplastic composites, but at the same time is able to withstand a large load. The inner side consists of plastic velcro hooks for fixation with the inner strap. Thanks to its rigid c onstruction, a correctly adjusted belt will not fall or slip during active physical exertion or in combat conditions. The MOLLE interface allows you to attach the necessary equipment to the waist belt. Fastens with a 25 mm Cobra buckle from the Austrian manufacturer Austrialpin. The product is resistant to friction, mechanical damage and is reliable even in extreme conditions. A high-quality belt will retain its appearance for a long time, without abrasions, kinks and other defects. The AustriAlpin Cobra buckle is a high-strength, functional, very reliable buckle with the patented AustriAlpin COBRA ™ lock. Manufactured by AustriAlpin, an Austrian company specializing in the production of mountaineering equipment. The

M-Tac shoulder straps are designed to attach to a tactical belt and can significantly increase the comfort of the belt. They are made from dense MIL-SPEC webbing and are adjustable in length with buckles. This allows the belt to be adjusted to a comfortable height during use. The shoulder straps have 4 attachment points to evenly distribute the load on the shoulders. This also helps to provide additional support when using heavier harnesses on the belt. The Elite tactical belt shoulder straps are sure to be of interest to fans of modern tactical equipment.