Backpacks for Drones

Modern war needs modern solutions. Today the Ukrainian military actively uses FPV drones to destroy enemy equipment and manpower. There is a need for convenient and safe transportation of these "ferocious birds». M-Tac has developed and released a special bag-backpack designed for safe storage and transportation of FPV drones. The main compartment opens like a suitcase and is divided into separate sections for the convenient storage of seven drones. If you remove the internal compartments, the backpack can store15 drones without batteries. At the top of the backpack the designers have added a special compartment for additional devices: remote control, batteries, glasses, cables, etc. On the sides, the product is equipped with a MOLLE Laser Cut system, which is made of Cordura Squadron and allows you to attach additional equipment. On the front of the backpack there is a lacing made of elastic cord with a fastener, which makes it possible to carry a jacket, camouflage net or similar items. The Velcro panel is for your favorite IDs and patches. The backpack is made of Cordura 500D and Cordura 1000D - a high-quality and wear-resistant material that will provide protection against mechanical damage and a long service life. The walls of the backpack and internal compartments are made of polymer material - EVA foam, which protects the drones well from damage during transportation. The shoulder straps are equipped with a quick release system. Additional handles on both sides and on the top allow you to carry the backpack either horizontally or vertically. This backpack from M-Tac is an excellent choice for highly effective protection of drones, their reliable storage and convenient transportation. Material: Cordura 500D, Cordura 1000D, Cordura Squadron Hardware: Woojin Zippers

M-Tac has released a MODULAR MULTICAM DRONE BACKPACK, which will be a great addition to your kit. The backpack consists of two main compartments. The first is equipped with a special organizer for convenient storage of drones, their charging units, batteries and remote controls. The inner panels of the compartment are made of velcro fabric allowing you to adjust the organising dividers according to your needs. The upper and lower bays of the organizer are designed for carrying remote controls, the middle ones are for drones and their chargers, and the smaller cells are for batteries. On each of the larger bays an elasticated strap provides additional security for the contents. On the flap of the first compartment there is a pocket for a tablet, which closes with a Velcro strap. Above it there is a pocket with a zipper, intended for placing your essentials. On top of the flap there is a cardholder for storing 5 memory cards and a special pocket for placing drone propellers. In the second main compartment there is also a card holder for storing 5 memory cards and an organizer designed for placing batteries, cords from chargers, etc. There are MOLLE systems on the front and sides of the backpack, to which you can attach additional equipment. Also, on the front of the backpack there is a pocket with a moisture-proof zipper, and a velcro panel with slots, designed to accommodate both additional equipment, as well as IDs and patches. On the top and the sides of the backpack there are special handles made of webbing to conveniently carry the backpack. Webbing straps attached to the bottom of the backpack are intended for attaching equipment. The backpack is made of Cordura 500 - a durable material that is resistant to abrasion and high loads. The side walls of the backpack are

Modern war needs modern solutions. Today the Ukrainian military actively uses FPV drones to destroy enemy equipment and manpower. There is a need for convenient and safe transportation of these "ferocious birds». M-Tac has developed and released the M-TAC BAG-BACKPACK FOR FPV 10'' DRONES LIGHTWEIGHT (WITHOUT COMPARTMENTS) MULTICAM designed for safe storage and transportation of FPV drones. The product features a main compartment specifically designed for transporting drones. On the flap of this compartment, there are two generously sized mesh pockets suitable for holding small, lightweight items. The inner lining of the side sections of the backpack is made of Velcro fabric, allowing for the attachment of special compartments for securing drones (not included). Additionally, a Velcro panel is sewn onto the front of the bag for displaying IDs and patches. The upper compartment of the backpack is intended for the separate storage of drone power supplies and other essential items. It closes with a zipper made by YKK, a renowned manufacturer of high-quality accessories. To prevent external mechanical damage, the upper section is further reinforced with EVA foam and additional sitting pad. The backpack is made of Cordura 500D and Cordura 1000D - a high-quality and wear-resistant material that will provide protection against mechanical damage and a long service life. This product offers two methods of transportation: as a bag or as a backpack. You can carry it as a bag using the side handles with velcro fastening, or by using the short transport handles—two located on the top and one on the bottom. If you prefer to use it as a backpack, it features softened straps and a chest strap with a fastex buckle for added comfort and stability. Materials: - Cordura 500D - Tegris - EVA

Modern war needs modern solutions. Today the Ukrainian military actively uses FPV drones to destroy enemy equipment and manpower. There is a need for convenient and safe transportation of these "ferocious birds». M-Tac has developed and released the M-TAC BAG-BACKPACK FOR FPV 7'' DRONES LIGHTWEIGHT (WITHOUT COMPARTMENTS) MULTICAM designed for safe storage and transportation of FPV drones. The main compartment opens like a suitcase and is divided into separate sections for the convenient storage of seven drones. If you remove the internal compartments, the backpack can store15 drones without batteries. At the top of the backpack the designers have added a special compartment for additional devices: remote control, batteries, glasses, cables, etc. On the sides, the product is equipped with a MOLLE Laser Cut system, which is made of Cordura Squadron and allows you to attach additional equipment. On the front of the backpack there is a lacing made of elastic cord with a fastener, which makes it possible to carry a jacket, camouflage net or similar items. The Velcro panel is for your favorite IDs and patches. The backpack is made of Cordura 500D and Cordura 1000D - a high-quality and wear-resistant material that will provide protection against mechanical damage and a long service life. The walls of the backpack and internal compartments are made of polymer material - EVA foam, which protects the drones well from damage during transportation. The shoulder straps are equipped with a quick release system. Additional handles on both sides and on the top allow you to carry the backpack either horizontally or vertically. This backpack from M-Tac is an excellent choice for highly effective protection of drones, their reliable storage and convenient transportation. Material: Cordura

Modern warfare requires modern solutions. As Ukrainian soldiers actively use FPV drones to destroy enemy equipment and personnel, there is a growing need for convenient and secure transportation of these "fierce birds." M-TAC has developed and released a new version of the M-TAC FPV 7’’ DRONE BAG-BACKPACK LIGHTWEIGHT, designed for the neat storage and careful transportation of FPV drones. This model is lighter than the previous version, yet it has not lost its protective features. The main compartment opens like a suitcase and is divided into separate sections to conveniently store seven drones. If the internal dividers are removed, the bag-backpack can accommodate 15 drones without batteries. The top of the backpack includes a compartment specifically for additional devices: the controller, batteries, goggles, cables, etc. On the front of the backpack, there is an elastic cord with a fastener, allowing you to carry a jacket, camouflage net, or other similar items. A Velcro panel is provided for attaching your favorite identifiers and patches. The bag-backpack is made of Cordura 500D and Cordura 1000D, high-quality and durable materials that ensure protection from mechanical damage and a long service life. The compartments of the backpack are reinforced with foam padding and Tegris — a durable material made from 100% polypropylene, known for its excellent wear resistance, high strength, and protective properties. The internal dividers are also constructed from Tegris composite, providing reliable protection for drones during transport. Thanks to the updated materials used for the compartments and dividers, the overall weight of the bag has been significantly reduced — by 1.5 to 2 kg in full configuration — which is a major advantage when carrying equipment over long dis

Modern warfare requires modern solutions. As Ukrainian military forces actively use FPV drones to destroy enemy equipment and personnel, there is a growing need for convenient and secure transportation of these “ferocious birds.” M-TAC, expanding its range of gear for transporting FPV drones, has developed and released a new LIGHTWEIGHT FPV 10” DRONE BAG-BACKPACK. The product consists of a main compartment designed to simultaneously carry up to 6 drones (maximum). On the flap of the main compartment, there are two spacious mesh pockets for storing small, lightweight items. Inside the main compartment, there are 5 internal dividers made of thermoplastic composite Tegris, further reinforced with carbon. For safe transportation, the areas of the dividers that are in contact with the propeller blades are padded with soft EVA foam. The same material is used for the vertical “rails” on the dividers, which prevent the drones from sliding during transport. The inner lining of the bag's side parts is made of Velcro fabric, allowing dividers to be arranged as needed. The front part of the bag has a Velcro panel for placing identifiers and patches. The upper compartment of the bag-backpack is designed for the separate storage of drone batteries and other necessary items. It is closed with a zipper from the leading hardware manufacturer, the Japanese company YKK. To prevent external mechanical damage, the upper compartment is additionally reinforced with EVA foam and foam padding. The bag-backpack is made from Cordura 500D, a highly durable material resistant to abrasion and heavy loads. It is equipped with handles and straps for two transportation modes: as a bag or as a backpack. The bag can be transported as a bag using side handles with Velcro fixation, or using short transport

The new M-TAC AVATA 2 DRONE SHOULDER BAG is designed for storing and transporting the DJI Avata 2 drone, goggles, controller, batteries, and memory cards. The bag features one main compartment lined with Velcro fabric, which includes space for the drone and two additional compartments for the controller and batteries. These compartments are equipped with elastic strap holders secured with Velcro and feature perforated pull tabs for ease of access. On the lid of the main compartment, there is a mesh zippered pocket for storing essentials such as cables, chargers, documents, etc. Mounted on top of the mesh pocket is a Velcro-attached cardholder designed to hold two memory cards. At the bottom of the bag, there is a dedicated compartment for goggles, equipped with an elastic strap for secure placement, as well as a small external zippered pocket. MOLLE Laser Cut panels are located on the front and sides for attaching additional gear. The back of the bag includes a large mesh pocket. A standout feature of the M-TAC Avata 2 Drone Bag is its exceptional versatility, as it can be carried in three different configurations. It functions as a backpack with detachable shoulder straps and a chest strap that connect via Gatekeepers, allowing for easy removal when not needed. It can also be used as a shoulder bag, thanks to a removable and adjustable strap that attaches to the sides with the same Gatekeeper system. Additionally, the bag can serve as a modular pouch by utilizing rear MOLLE-compatible adapters with integrated straps that weave into MOLLE panels—such as those on a plate carrier—while quick-release zippers ensure fast and effortless detachment. Materials: Main material: Cordura 500D Loops on holders & cardholder: Hypalon Back adapters: Tegris, Cordura Squadron