Guns No Roses
M-Tac FPV Drone Bag-Backpack for 7 Drones Lightweight
Modern warfare requires modern solutions. As Ukrainian soldiers actively use FPV drones to destroy enemy equipment and personnel, there is a growing need for convenient and secure transportation of these "fierce birds." M-TAC has developed and released a new version of the M-TAC FPV 7’’ DRONE BAG-BACKPACK LIGHTWEIGHT, designed for the neat storage and careful transportation of FPV drones. This model is lighter than the previous version, yet it has not lost its protective features. The main compartment opens like a suitcase and is divided into separate sections to conveniently store seven drones. If the internal dividers are removed, the bag-backpack can accommodate 15 drones without batteries. The top of the backpack includes a compartment specifically for additional devices: the controller, batteries, goggles, cables, etc. On the front of the backpack, there is an elastic cord with a fastener, allowing you to carry a jacket, camouflage net, or other similar items. A Velcro panel is provided for attaching your favorite identifiers and patches. The bag-backpack is made of Cordura 500D and Cordura 1000D, high-quality and durable materials that ensure protection from mechanical damage and a long service life. The compartments of the backpack are reinforced with foam padding and Tegris — a durable material made from 100% polypropylene, known for its excellent wear resistance, high strength, and protective properties. The internal dividers are also constructed from Tegris composite, providing reliable protection for drones during transport. Thanks to the updated materials used for the compartments and dividers, the overall weight of the bag has been significantly reduced — by 1.5 to 2 kg in full configuration — which is a major advantage when carrying equipment over long dis
€475.32
M-Tac FPV Drone Bag-Backpack for 10 Drones Lightweight
Modern warfare requires modern solutions. As Ukrainian military forces actively use FPV drones to destroy enemy equipment and personnel, there is a growing need for convenient and secure transportation of these “ferocious birds.” M-TAC, expanding its range of gear for transporting FPV drones, has developed and released a new LIGHTWEIGHT FPV 10” DRONE BAG-BACKPACK. The product consists of a main compartment designed to simultaneously carry up to 6 drones (maximum). On the flap of the main compartment, there are two spacious mesh pockets for storing small, lightweight items. Inside the main compartment, there are 5 internal dividers made of thermoplastic composite Tegris, further reinforced with carbon. For safe transportation, the areas of the dividers that are in contact with the propeller blades are padded with soft EVA foam. The same material is used for the vertical “rails” on the dividers, which prevent the drones from sliding during transport. The inner lining of the bag's side parts is made of Velcro fabric, allowing dividers to be arranged as needed. The front part of the bag has a Velcro panel for placing identifiers and patches. The upper compartment of the bag-backpack is designed for the separate storage of drone batteries and other necessary items. It is closed with a zipper from the leading hardware manufacturer, the Japanese company YKK. To prevent external mechanical damage, the upper compartment is additionally reinforced with EVA foam and foam padding. The bag-backpack is made from Cordura 500D, a highly durable material resistant to abrasion and heavy loads. It is equipped with handles and straps for two transportation modes: as a bag or as a backpack. The bag can be transported as a bag using side handles with Velcro fixation, or using short transport
€818.07
M-Tac Bag-Backpack for FPV 7 Drones Lightweight (Without Compartments)
Modern war needs modern solutions. Today the Ukrainian military actively uses FPV drones to destroy enemy equipment and manpower. There is a need for convenient and safe transportation of these "ferocious birds». M-Tac has developed and released the M-TAC BAG-BACKPACK FOR FPV 7'' DRONES LIGHTWEIGHT (WITHOUT COMPARTMENTS) MULTICAM designed for safe storage and transportation of FPV drones. The main compartment opens like a suitcase and is divided into separate sections for the convenient storage of seven drones. If you remove the internal compartments, the backpack can store15 drones without batteries. At the top of the backpack the designers have added a special compartment for additional devices: remote control, batteries, glasses, cables, etc. On the sides, the product is equipped with a MOLLE Laser Cut system, which is made of Cordura Squadron and allows you to attach additional equipment. On the front of the backpack there is a lacing made of elastic cord with a fastener, which makes it possible to carry a jacket, camouflage net or similar items. The Velcro panel is for your favorite IDs and patches. The backpack is made of Cordura 500D and Cordura 1000D - a high-quality and wear-resistant material that will provide protection against mechanical damage and a long service life. The walls of the backpack and internal compartments are made of polymer material - EVA foam, which protects the drones well from damage during transportation. The shoulder straps are equipped with a quick release system. Additional handles on both sides and on the top allow you to carry the backpack either horizontally or vertically. This backpack from M-Tac is an excellent choice for highly effective protection of drones, their reliable storage and convenient transportation. Material: Cordura
€281.88
M-Tac Sling Pistol Bag Elite
The M-Tac Elite Sling Pistol Bag is a comfortable, stylish, and versatile shoulder bag. The bag consists of 4 spacious compartments. The front compartment closes with a zipper. Inside, the compartment is an organizer that allows you to rationally place the necessary items. The inner compartment of the bag (a large pocket) also closes with a zipper. Materials: Cordura 1000 Slings: MIL-SPEC Backpack dimensions: 24 x 17 x 10cm Fittings: YKK, 2M Features: Velcro-panel, which will allow you to place the weapon in a convenient extraction position using the insert holster. (insert not included) Volume: 4 l. Due to its unique qualities Cordura is widely used in tactical equipment of military, law enforcement and special forces. It is mainly materials with linear density of 1000d and 500d. Linear density - is the ratio of weight of the thread of matter and its length. It is measured in denier. This unit of measurement is mainly used for nylon products. Accordingly, the higher this value, the thicker and heavier the fabric. The physical and technical characteristics of CORDURA 1000D fabric are very high, breaking load is about 3000 N, breaking load is about 150 N. The abrasion resistance is over 50,000 cycles. It is used for clothes, covers, pouches. Be it a tactical backpack, pouches or jacket.Products made of CORDURA materials will undoubtedly pass the test of time and distance. CORDURA is durability, reliability and style. In terms of strength, it is beyond any competition. Woojin plastic® - is a world renowned company for the production of quality plastic fittings. Woojin plastic® - is a Korean company founded in 1979. The company's headquarters were in Korea until 1993, after which it moved to the United States. Since then, the company has grown even faster. Thus, in two yea
€62.03
M-Tac Armored Vest Cover Sturm Gen.II Elite
The designers at M-Tac have developed an innovative body armor cover specifically for the 3rd Assault Brigade, taking into account the experience and needs of the military. This product has become a real legend of this war. Thanks to the soldiers of the 3rd Assault Brigade, the body armor cover has passed the test of battle and has proven to be a reliable piece of kit. The main feature of the M-TAC STURM ELITE ARMORED VEST COVER is the quick-release fastex from Duraflex, which are placed on the camberband and shoulder straps. These Fastexes belong to the premium class, due to the combination of a simplified fastening (unfastening) system, light weight and strength (withstands high loads). To fasten, place the part attached to the camberband (the upper part of the shoulder strap) into the fastex pass on the front part of the plate carrier (the lower part of the shoulder strap) and pull it until it clicks. In order to unfasten it, it is necessary to pull quickly up/down (when unfastening the fastex on the shoulder straps - to the right/left). This product is compatible with standard ESAPI (USA) armor plates; medium (31.8 x 24.1 cm), large (33.7 x 26 cm) and extra large (35.5 x 28 cm). With the help of an internal elastic band and special straps, you can easily adjust it to the size of the plate you need. Also available separately for the body armor cover is the M-TAC CLASS 1 PROTECTION CLASS 1 SOFT BALLISTIC PACKAGE KIT FOR THE STURM ARMOR VEST, consisting of three ballistic protection panels: front, back, and in the cummerbund. The body armor cover is made of high-quality Cordura 500D material - a super-strong fabric resistant to abrasion and high loads. The extended cummerbund with MOLLE interface for 4 slings allows you to carry additional equipment - for example, hori
€297.45
M-Tac Armored Vest Cover Sturm Elite
The M-Tac designers are taking into account the experience and recommendations from the military, developed an innovative body armor cover specifically for the 3rd OSHBr. This product became a true legend of this war, and thanks to the soldiers of the 3rd OShBr, the body armor cover passed the battle test and proved itself as a reliable and high-quality product. The main feature of the M-TAC STURM ELITE ARMORED VEST COVER and its main difference from previous generations is the quick-release fastex from Duraflex fittings, which are placed on the cummerbund and shoulder straps. These Fastexes belong to the premium class, due to the combination of a simplified fastening (unfastening) system, light weight and strength (withstands high loads). To fasten the fastex, place the part attached to the cummerbund (the upper part of the shoulder strap) into the fastex pass on the front part of the plate carrier (the lower part of the shoulder strap) and pull it until it clicks. In order to disconnect it, it is necessary to pull sharply up/down (when unfastening the fastex on the shoulder straps - to the right/left). This product is compatible with standard ESAPI (USA) armor plates Medium (31.8 x 24.1 cm), Large (33.7 x 26 cm) and Extra Large (35.5 x 28 cm). With the help of an internal elastic band and special straps, you can easily adjust it to the size of the plate you need. Also available separately for the body armor cover is the M-TAC CLASS 1 PROTECTION CLASS 1 SOFT BALLISTIC PACKAGE KIT FOR THE STURM ARMOR VEST, consisting of three elements: front and back, as well as ballistic protection in cummerbund. The body armor cover is made of high-quality Cordura 500D material - a super-strong fabric resistant to abrasion and high loads. An extended cummerbund with a MOLLE interface
€281.41
M-Tac Pants STURM Nyco Extreme Gen.II
The new generation of Sturm tactical pants is even more comfortable, practical and durable. Made from durable material NyCo Extreme (57% nylon, 43% cotton) from the American company Brockwood. This fabric has high strength, wear resistance and breathability. Flexible inserts (91% nylon, 9% elastane) stretch in two directions and guarantee comfort during active use. Around ??the knees, the designers have used Cordura 500D with fixed EVA-foam inserts 2-4 mm thick, which will provide effective protection of the knee joints against impacts and mechanical damage. This model is also equipped with knee pads. Thanks to the well-thought-out cut, the pants do not restrict freedom of movement: they are comfortable to jump, run, bend, squat and move over rough terrain. Many thoughtful pockets allow you to carry essential items. A design aspect of this model are the large double pockets that do not visually affect the silhouette. Trouser pockets have Fastex closures for knee height adjustment. The belt of the pants is adjustable using Murdock webbing straps, and they39;re designed to be worn with a belt up to 5.5 centimeters wide. There are two D-rings at the front, below the waist, for attaching various gear. The width of the knee area is adjustable with the help of velcro. An elastic cord is stretched along the lower edge of the pants and Velcro panels are provided to allow general size adjustment. M-Tac pants Sturm Gen.II NyCo Extreme is a great option for any tactical tasks. Material: NYCO EXTREME (57% nylon, 43% cotton) Flex (91% Nylon, 9% Elastane) Cordura 500D Hardware: YKK
€215.60
M-TAC Ecopybook Tactical An all-weather notebook (Fireteam-Squad)
The Ecopybook Tactical Notebook is a durable, all-weather A5 notebook that easily fits into any pocket and is designed for use in extreme weather conditions. The cover is made from a matte, anti-glare polymer, while the pages are made from synthetic materials that are both water-resistant and oil-resistant. You can write on the pages using regular pencils. To erase your notes, you can use an eraser, or if you're outdoors, you can use wet sand or earth followed by rinsing with water. With regular use, it's advisable to periodically degrease the pages, which can be done using alcohol-based solutions or surface and glass cleaners. The notebook includes the following items: The notebook includes the following items: - 1 NATO Phonetic Alphabet -1 Medical Evacuation Request - 1 Explosive Ordnance Report - 1 Fire Support Request - 1 Salute Event Report - 1 Standard Identification / Physical Area of Operations / Unit Size (Echelon) - 1 Facility/Object Status - 1 Unit Symbols / Tactical Tasks - 1 Control Symbols - 1 Counter-IED Tactics Guide - 1 Guide for Determining Linear Quantities Using the “Thousands Formula” - 2 Firing Position Cards - 10 Gridded Sheets - 1 Protractor - 2 NATO Standard Marking Rulers
€32.43
MIWO MILITARY Insulating mat MS-1
The MS-1 insulating mat is a simple solution to a problem faced by anyone who has conducted tactical operations at least once and was forced to sit down in random terrain. In such a situation, the cold from the ground (especially when wet) causes great discomfort. The remedy for this is the MS-1 insulating mat, which, thanks to its simple structure, minimal weight and optimally selected dimensions, is easy to transport and always at hand. The mat is carried under the lower edge of the equipment. When it is time to use, simply undo the buckle, and the mat unfolds.
Made from cordura.
Dimensions:
- length: 41 cm- width: 36 cm
Made from cordura.
Dimensions:
- length: 41 cm- width: 36 cm
€27.50
Tourniquet LTQ 1.0
Tourniquet LTQ 1.0 - made in Lithuania
The product is ISO 14001/13485 certified. Also, the NSN code of the "Defense Resources Agency under the Ministry of Defense, Military Standardization and National Codification Office" (6515-47-001-1230) was issued.
Specifications:
·Fast application
·Bullet Proof Quality
·Polyester belt-93cm long and 4cm wide
·Durable platform-Flexible 5cm wide platform
·Fixation triangle-Made from PA6 GF30 plastic. Has special ‘hooks’ used for fixating the end of the belt
·Hook&loop tape-Dense texture allows for extremelly strong grip
·Marking tape-Made from reflective material
·UHMWPE tape-Extremly strong inner tape used for tightening. Made from ultra-high molecular weight polyethylene that is able to handle several tonnes of pressure
The product is ISO 14001/13485 certified. Also, the NSN code of the "Defense Resources Agency under the Ministry of Defense, Military Standardization and National Codification Office" (6515-47-001-1230) was issued.
Specifications:
·Fast application
·Bullet Proof Quality
·Polyester belt-93cm long and 4cm wide
·Durable platform-Flexible 5cm wide platform
·Fixation triangle-Made from PA6 GF30 plastic. Has special ‘hooks’ used for fixating the end of the belt
·Hook&loop tape-Dense texture allows for extremelly strong grip
·Marking tape-Made from reflective material
·UHMWPE tape-Extremly strong inner tape used for tightening. Made from ultra-high molecular weight polyethylene that is able to handle several tonnes of pressure
€19.00
IFAK - Individual First Aid Kit
Individual First Aid Kit - a personal first aid kit containing items to treat potentially fatal injuries
The kit includes:
Bleeding arresting (haemostatic) dressing
Tourniquet
Nasopharyngeal tube with lubricant 1pc
Decompression needle 1pc
Eye protection cap 1pc
TCCC victim card 1pc
Occlusive chest dressing 2pcs
Compression bandage (Israeli) 1 pc
Limb immobilisation splint 1pc
Nitrile gloves, dark 2 pairs
Sterile dressing - wide 1pc
Sterile dressing for swabbing 1pc
Sterile abdominal dressing 1pc
Elastic bandage 1pc
Triangular bandage - scarf 1pc
Bandage for splint 1pc
Alcohol antiseptic wipes 4pcs
Gel for burns 1pc
Tear-off patch 1pc
Trauma scissors 1pc
Non-washable marker 1pc
First aid blanket 1pc
Duck tape 1pc
Bag - MOLLE clip or attachment
The kit includes:
Bleeding arresting (haemostatic) dressing
Tourniquet
Nasopharyngeal tube with lubricant 1pc
Decompression needle 1pc
Eye protection cap 1pc
TCCC victim card 1pc
Occlusive chest dressing 2pcs
Compression bandage (Israeli) 1 pc
Limb immobilisation splint 1pc
Nitrile gloves, dark 2 pairs
Sterile dressing - wide 1pc
Sterile dressing for swabbing 1pc
Sterile abdominal dressing 1pc
Elastic bandage 1pc
Triangular bandage - scarf 1pc
Bandage for splint 1pc
Alcohol antiseptic wipes 4pcs
Gel for burns 1pc
Tear-off patch 1pc
Trauma scissors 1pc
Non-washable marker 1pc
First aid blanket 1pc
Duck tape 1pc
Bag - MOLLE clip or attachment
€136.36
M-Tac Plate Carrier Lower Accessory Pouch Gen.II Elite
The practical and functional Gen.II Elite hip pack from M-TAC will perfectly complement your individual equipment set. The sachet is made of high-quality, durable Cordura 1000D material. YKK zippers come from a world-famous manufacturer of haberdashery fittings. This model is also equipped with a strap made of Velcro material along the entire length of the sachet, which can be attached to the Velcro panel, located under the flap of the Plate Carrier tactical vest or bulletproof vest, thus increasing their functionality. The hip bag has two compartments that allow you to put your necessities in it. In the front part, there is a Velcro panel sewn on the basis of the Laser Cut technology, allowing the attachment of additional equipment and badges.
€31.95
M-Tac Mag pouch "Kolchan" for AK/AR MOLLE
M-Taс mag pouch “Kolchan” was created in collaboration with Balistyka. Made of high-quality fabric Cordura 1000D - high durability fabrics, resistant to abrasion and heavy loads. The side walls are inserts made of impact-resistant plastic, thanks to which the magazine is attached. The MOLLE system is located on the front panel, which allows you to connect additional equipment. This model is compatible with AK-47, AKM, AK74 and AR type magazines. Compact size allows you to easily place three or more pouches on the equipment, depending on the size of a plate carrier or a bulletproof vest. The Quiver will provide a quick recharge and will be a great addition to an individual set of equipment for a fighter.
€16.39
M-Tac Balaclava Elite Fleece
Fleece balaclava for cool, windless weather from the domestic manufacturer M-Tac. Product material - 100% polyester. Warm, elastic enough, removes moisture well and dries quickly. Can be used as a helmet, hat, half mask or scarf-pipe. Due to its elasticity, it will fit any size of an adult man's head. Material 100% polyester
€7.37
M-Tac Radio Pouch MOLLE
The design of the radio pouch from the M-Tac brand will provide access to the main controls of the portable radio station (PTT button, channel and sound switches). The PTT button and the radio station microphone remain open, which will allow you to use the radio station without a headset (when placing the pouch on the shoulder of the unloading systems). The pouch is compatible with Motorola 4400/4800
Mounting system: MOLLE
Hardware: WJ
Dimensions: 14 x 7 x 4 cm
Material: 1000D Cordura
Mounting system: MOLLE
Hardware: WJ
Dimensions: 14 x 7 x 4 cm
Material: 1000D Cordura
€19.93
M-Tac Pouch For Tourniquet Elastic Molle Gen.III MOLLE
The tourniquet pouch is an important part of a fighter's equipment and will allow you to conveniently carry a C-A-T tourniquet. The pocket for the tourniquet is made of a wide elastic band, which reliably secures the tourniquet. The inner wall is made of nylon webbing, which allows you to easily remove the tourniquet from the pouch. Additional fixing elements are made from webbing sewn from high-quality Cordura Squadron material. Also, in this version, the designers have added an elastic band for attaching a marker pen. Thanks to the well-thought-out design of the pouch, you can instantly remove the tourniquet and use it very quickly. This model easily attaches to gear using the MOLLE interface, also made from Cordura Squadron.
€13.56
M-Tac Pouch Accessory Lower Large Elite
Practical and functional, the Large Elite Lower Accessory Pouch, from the M-Tac brand is the perfect complement to your personalized outfit.
Made of high quality and durable Cordura 500D material. Zippers from YKK, the world leader in the production of hardware.
Made of high quality and durable Cordura 500D material. Zippers from YKK, the world leader in the production of hardware.
€40.68
M-Tac Admin pouch Elite MOLLE
Convenient and functional organizer Admin Elite by M-Tac is designed to store documents, mobile phone, keys, cards and other things. Made of high-quality Cordura 500D fabric - fabrics with high durability, resistant to abrasion and heavy loads. The organizer is attached to the equipment using the MOLLE system. It is closed with a waterproof AquaGuard zipper, which protects the contents against moisture. Inside the organizer, brand designers have provided a special removable holder for securely fixing a mobile phone. Velcro for badges or patches on the front. The M-Tac Admin Elite organizer will be a great addition to the equipment of a modern fighter. Material: Cordura 500D Fittings: YKK
€30.07