Best sellers

M-Tac nylon belt with plastic buckle . The advantage of this belt is the fact that it’s possible to open the buckle with one hand - which theoretically enables a wounded soldier to independently get rid of unnecessary pieces of gear. This belt is a replica of the belt that was part of the American BSS ( Belt Shoulder System ), known as A.L.I.C.E . (All-Purpose Lightweight Individual Carrying Equipment), which was adopted by the US Army in early 80 's . It can also serve as a simple belt, even if you do not have any pouches. Just keep in mind, that this belt is a bit wider, than regular trouser belts ( 5.5cm ), so check the size of your trouser loops before buying. Material: 100% polyester Belt Width: 5.5 cm

The military tactical belt is ideal for military personnel , practical shooters and those who lead an active lifestyle. The Cobra Buckle Tactical Belt can be used as a tactical pant or pistol belt. This accessory consists of an inner ( 40mm ) and outer ( 25mm ) nylon webbing, making it quite sturdy. The outer strap features a molle interface that allows you to securely attach additional equipment to the belt. Fastens with a black Cobra 25mm military-grade buckle from Austrialpin, which can withstand even the most extreme loads. It closes quickly and can be easily unfastened by simultaneously pressing the side latches. The free edge of the strap is secured with Velcro. This product is resistant to abrasion and mechanical damage. 

The M-TAC Sphaera Hex Hardsling Bag Gen.II is a versatile everyday bag that combines a stylish look with practical functionality. It is made from Cordura 500D and Cordura Hex, highly durable, wear-resistant materials that are easy to maintain. For protection against moisture and adverse weather, the fabrics have been treated with DWR and PU coatings. The bag features a single main compartment, which contains two internal pockets: one zippered and one Velcro panel that can be used to attach modular inserts if required. The front of the bag includes a spacious pocket and four straps for attaching additional equipment. At the back, there is a compartment for concealed carry. This compartment features Velcro panels for attaching a holster and a quick-access system, which works via a special strap: attach it to the shoulder strap and pull sharply to open the bag instantly. The bag comes with an adjustable shoulder strap, allowing it to be worn across the body or on the waist. The rear panel also features a small concealed pocket, ideal for carrying a phone or similarly sized items. Materials: Cordura 500D Cordura Hex Hardware: Woojin YKK Features: Concealed carry compartment with quick-access system and option to attach modular inserts Two zippered compartments for everyday items Open rear pocket for smartphone Dimensions: Height: 20 cm Top width: 26 cm Bottom width: 20 cm

The M-TAC Sling Pistol Bag Hex is a versatile everyday bag designed for concealed carry. It is made from Cordura 500D and Cordura Hex, highly durable, wear-resistant materials that are easy to maintain. For added protection against moisture and adverse weather, the fabrics have been treated with DWR and PU coatings. The bag features a main compartment with a special buckle from Woojin, designed for concealed carry and quick access. The rear wall of this compartment is lined with Velcro, allowing attachment of a holster or modular inserts (not included). The front compartment includes an organiser and mesh pocket, ideal for storing an everyday carry (EDC) kit. Additionally, there is a zippered front pocket with a pull tab for easy opening. The bag comes with an adjustable shoulder strap with a quick-release buckle. At the back, there is an extra vertical pocket for securely storing small valuables. Main materials: Cordura 500D Cordura Hex Lining: Oxford 300D with DWR and PU coatings Hardware: Woojin YKK Dimensions (empty): 25*18*5 cm

Materials: body – duralumin writing tip – metal and graphite alloy paracord loop for convenient use Simple and durable. Designed for use in any weather conditions. Made using only high-quality materials. One ECOPYBOOK TACTICAL pencil equals up to 150 regular pencils in terms of service life. You can even write underwater! Recommended for use with ECOPYBOOK TACTICAL notebooks, but it can also be used with ordinary paper notebooks. If no cold weapon is available, ECOPYBOOK TACTICAL can partially replace it. Combat position: the paracord loop is placed on a finger. After combat use, the tactical pencil tip may remain in the enemy’s body. Such pencils are often called “eternal,” but we won’t say that. The ECOPYBOOK TACTICAL pencil is truly long-lasting — let’s say almost eternal. Attention: nothing lasts forever — if dropped hard onto concrete, the writing element may break. This is not a problem, because the tips are replaceable!

You can’t predict where an enemy bullet or piece of shrapnel will come from — that’s why it’s crucial to proactively protect yourself. M-TAC has developed the Ballistic Groin Protection to significantly increase the fragmentation protection area for the operator. The module consists of a central panel and two articulated side panels, allowing for unrestricted movement during high-intensity activities such as running, squatting, or walking. The side panels feature Laser-Cut MOLLE for attaching additional gear when needed. The groin protector secures to a tactical belt using side-mounted attachments. The main mounting section is made from Cordura 500D, reinforced with a Tegris thermoplastic composite between two fabric layers, offering exceptional strength while keeping weight low. The extended straps are interwoven through the MOLLE system on the belt and the groin protector, creating a secure and stable connection that doesn't interfere with other gear placement. At the bottom, a webbing strap with a Grip Toggle buckle from Korean manufacturer WOOJIN helps anchor the lower portion of the protector to the belt, keeping the MOLLE field fully usable. A quick-release system is integrated into all three sections of the module (sides and bottom) using high-quality buckles from Italian brand DUE EMME (2M) for rapid removal in emergency situations. Attention: only the case is included, ballistic pouches are not included! Materials: Cordura 500D, Tegris Webbing: Murdock Webbing Hardware: WOOJIN, DUE EMME (2M) Size: One-size-fits-most (adjustable via straps) Weight: 0.8 kg

You never know where an enemy bullet or shrapnel might come from, so it's best to think about your safety in advance. M-Tac has developed a new generation of shoulder protection for M-Tac plate carriers of the Cuirass QRS and Cuirass Elite models. This item is a compact shoulder module that provides anti-fragmentation protection for the bicep, shoulder joint, and arteries. The main feature of this generation (compared to the previous version) is the improved design. The Ergonomic Shoulder Protection with Class 1 Ballistic Panels consists of two interconnected parts. This design solution ensures additional protection for the shoulder joint and the area below the shoulder by using a separate structure for each zone. Thanks to this structural feature, the protection gained ergonomic properties that make it more comfortable to wear during active physical activity. The module attaches to the shoulder part of the plate carrier using Velcro fasteners. A side-release buckle (fastex) acts as a connecting element and allows you to remove the shoulder system if necessary. Special attention was paid to the anatomical shape of the product. The module is designed so that its height can be adjusted using the fastex buckle and a vertical Velcro strap. Each part of the module features special straps: the upper one with the buckle and the lower one with Velcro, allowing you to adjust the fit based on your arm size. The shoulder modules are made of Cordura, an ultra-durable material resistant to abrasion and high loads. The M-Tac Ergonomic Shoulder Protection with Class 1 Ballistic Panels (Pair) is compatible with: M-Tac Plate Carrier Cuirass Elite M-Tac Plate Carrier Cuirass Elite XL M-Tac Plate Carrier Cuirass Elite Gen.II M-Tac Plate Carrier Cuirass Elite XL Gen.II M-Tac Plate Carrier

It’s impossible to predict where an enemy bullet or shrapnel will come from, so it's best to think ahead about your own safety. M-TAC has developed and released Abdomen Protection with a Class 1 Ballistic Panel, which significantly increases the body’s protected surface area. This product is a compact, removable module that provides shrapnel protection for the lower abdomen. It consists of two sections connected by straps. Thanks to this design, the element does not cause discomfort during intense physical activity. Made from Cordura 500D, a durable material resistant to abrasion and heavy loads. The upper section of the module features an integrated pouch consisting of a spacious pocket with a water-resistant zipper. On the front of the pouch is a Velcro panel with slots, suitable for attaching extra gear, identifiers, or patches. At the bottom of the pouch is an elastic loop for securing a tourniquet and drain grommets for removing dirt and debris from the interior. The M-TAC Abdomen Protector with Class 1 Ballistic Panel can be mounted either directly to the Velcro panel located under the front plate or to a flap panel. This is made possible by a Velcro panel located on the upper part of the module. The hook Velcro strip is two-sided, allowing you to adjust its placement depending on your preferred mounting method. Material: Cordura 500D Attachment System: Hook-and-loop (Velcro) Weight: 0.6 kg Dimensions: • Width – 27 cm • Height – 24 cm Features: • Integrated utility pouch • MOLLE system compatibility

M-TAC has developed a new concept in personal protection systems for soldiers — a gorget with Class 1A ballistic panels designed for the M-TAC Cuirass QRS plate carrier. The product is a compact, detachable module that provides 360-degree fragmentation protection for the neck and upper back of the soldier. The module consists of two elements with Velcro fastenings. The front section is intended to protect the front of the neck, while the shoulder section provides protection for the shoulders, trapezius muscles, and the rear of the neck. The neck section attaches to the MOLLE interface on the chest panel of the Cuirass QRS plate carrier. The rear protection is fixed to the shoulder part of the plate carrier using Velcro straps that wrap around the shoulder straps of the vest. There are two such Velcro flaps on each side. The module is designed to ensure seamless ballistic coverage from the top edge of the front plate to the rear plate, covering additional surface area around the sides of the shoulder straps. Significant effort went into shaping the collar to be as ergonomic as possible for comfortable use. This design does not interfere with other gear and allows a sufficient range of head motion, even when wearing a helmet. Special attention was also given to the anatomical shape and low weight of the product. As a result, the gorget helps maintain the overall mobility and ergonomics of the equipment setup. If needed, the shoulder section can be used independently, and the neck protection can be kept folded at the front of the plate carrier. The front element of the gorget can also be removed to facilitate more comfortable weapon handling — though in this case, it will no longer protect the front of the neck. The module is made from 500D Cordura — an ultra-durable fabri

M-Tac has expanded its product line with the legendary "Rex team" design, creating a new hoodie that will be a great addition to the wardrobe of not only military personnel but also all fans of military style. The front of the hoodie features a shooting "team." It symbolizes the true power of friendship and support, which outweighs even the most powerful weapon. The fighters' grins indicate that they are extremely serious.On the back of the shirt, the same wild shooters are depicted, but now in the midst of battle. While not each of them handles their weapons in the same way, with the support of their reliable brothers, even the toughest challenges will turn into an adventure. The M-TAC HOODIE REX TEAM features a loose cut that allows for unrestricted movement during exercise. Its comfortable hood is adjustable, providing excellent protection against wind and adverse weather conditions. The cuffs and the bottom of the hoodie are made from knitted elastic, ensuring they maintain their shape and effectively prevent cold air from entering. Material: cotton, elastane; Printing: MagnaColours® (Premium inks resist fading).

"Trauma Kit" first aid kit - all necessary first aid equipment issued by the Lithuanian Armed Forces.
The kit includes:

Hemostatic dressing - ChitoGauze® XR Pro
Tourniquet - Tourniquet LTQ1.0 or C.A.T. gen 7
Occlusive Foxseal chest bandage 2pcs
Elastic compression Israeli bandage 1pcs
Nasopharyngeal tube with lubricant 1pcs
Decompression needle 1pcs
TCCC casualty card 1pcs
Nitrile gloves, dark 2 pairs
Reinforced adhesive tape 1pcs
Indelible marker 1pcs
First aid blanket (Silver-green) 1pcs
Bag - optional

M-Tac has developed and released a new LASER CUT MEDICAL SCISSOR POUCH, which will be a great addition to your equipment. This pouch is created for convenient carrying of medical scissors on a plate carrier, body armor, or other equipment. Fastening is carried out thanks to the elongated part of the bag, which alternately "weaves" between the slots on its back and the MOLLE system on the equipment. The pouch is able to securely hold the scissors thanks to the strap with fastex (manufactured by Woojin). Also, thanks to it, the length of the sling can be adjusted, adjusting it to different sizes of scissors. On the side of the bag there is a special eyelet designed for attaching a safety cord or other equipment with a suitable attachment. This pouch is sewn from Cordura Squadron - a super-strong material resistant to abrasion and high loads. It is made according to the innovative Laser Cut technology, which reduces the risk of fraying the edges of the finished product, thereby increasing its durability. Size: 5 * 10.4 cm; Material: Cordura Squadron; Sling: Murdock 20 mm; Furniture: Woojin; Fastening: MOLLE system.