Magazine pouches

M-Taс mag pouch “Kolchan” was created in collaboration with Balistyka. Made of high-quality fabric Cordura 1000D - high durability fabrics, resistant to abrasion and heavy loads. The side walls are inserts made of impact-resistant plastic, thanks to which the magazine is attached. The MOLLE system is located on the front panel, which allows you to connect additional equipment. This model is compatible with AK-47, AKM, AK74 and AR type magazines. Compact size allows you to easily place three or more pouches on the equipment, depending on the size of a plate carrier or a bulletproof vest. The Quiver will provide a quick recharge and will be a great addition to an individual set of equipment for a fighter.

M-Tac result for the store elastic (10 cm) Laser Cut. A very compact thing for AR 15 series stores, made with the latest technology. It consists of two parts: an insert with Kydex, which allows you to securely hold the store, and the result with elastic side inserts. This design allows you to maximize the angles at which you can insert or remove the store. On the front surface, MOLLE mounts are made using modern Laser Cut technology to attach additional small results (for example, under a grenade or a pistol magazine). Materials: Сordura

With their unique design, the elastic pouch by M-Tac securely holds the magazine, it does not fall out under any circumstances, not even when skydiving or in upside down position. But as soon as you make an effort to take out the magazine, it is right there in your hand, since the grip surface remains accessible to you when the magazine is in the pouch. This significantly speeds up reloading and enables you to act faster and in a more efficient way. Material: Cordura 500D Due to its unique qualities, Cordura is widely used in tactical equipment of the military, law enforcement and special forces. 

This practical and easy-to-open M-Tac pouch will enable you to use magazines as quickly and conveniently as possible during training or performing combat tasks. It is made of Cordura 500D - an ultra-durable fabric that is resistant to abrasion and high loads. The pouch makes it possible to place two of the AR or AK magazines. The well-thought-out design reliably secures the magazines and stops them from falling out during active movements. The front MOLLE interface is made by Laser Cut technology and allows you to attach additional equipment. The sides made of nylon webbing allow the magazines to be easily removed from the pouch. Attaches to equipment using the MOLLE interface. The total volume is adjusted by an elastic cord and a toggle at the bottom of the pouch. Fastening system: MOLLE

This functional and lightweight pouch from M-Tac will allow you to operate magazines as conveniently as possible and ensure quick reloading during combat tasks. This model makes it possible to place two AR/AK-type magazines and even accommodate magazines for the Kalashnikov RPK-74. This pouch is made of Cordura 1000D - a high-quality material that is resistant to abrasion and heavy loads. The well-thought-out shape ensures reliable storage inside and protects the magazines from accidentally falling out during active movement. In this model, the designers have provided a cover flap, which, if desired, can be attached to the back of the pouch or completely removed, modifying it into an open one. With the help of velcro, the cover flap is adjustable in height which allows you to adjust it to suit the size of the magazines. The front MOLLE interface makes it possible to attach additional equipment. The sides are made of nylon webbing which ensures easy removal of magazines from the pouch. It is attached to a plate carrier or RPS using the MOLLE interface. The total volume is adjusted with the help of an elastic cord and a fastener in the lower part of the product. Material: Cordura 1000D Features: Light and easy to use; Reliably secures magazines; The cover flap is removable, which allows you to modify the pouch into an open version; MOLLE interface. Due to its unique qualities, Cordura is widely used in tactical equipment for military, law enforcement, and special forces. It is mainly used in materials with a 1000d and 500d linear density. Linear density is the ratio between the weight of the fabric and its length. It is measured in denier. This unit of measurement is mainly used for nylon fabrics. So, the higher the index, the more dense and heavy the fabric. The physical

A functional and light pouch will allow you to securely place 3 magazines of the AK/AR series and ensure quick reloading during combat tasks. Made of elastic band in combination with Cordura Squadron - a high-tech material resistant to abrasion and high loads. The magazine fixation system is carried out with the help of an elastic band and a safety band with "eyes", which provide reliable protection against falling out. Thanks to the well-thought-out design, the working surface of the magazine grip remains open, so manipulations with it are much faster. The universal shape allows you to place a portable radio station or other equipment of similar size. On the sides, the designers provided elastic bands for attaching the chemical light and highlighters. Woojin hardware in combination with v

A functional and light pouch will allow you to securely place four AK/AR magazines and ensure quick reloading during combat tasks. Made of elastic band in combination with Cordura Squadron - a high-tech material resistant to abrasion and high loads. The magazine fixation system is carried out with the help of an elastic band and a safety band with "eyes", which provide reliable protection against falling out. Thanks to the well-thought-out design, the working surface of the magazine grip remains open, so manipulations with it are much faster. The universal shape allows you to place a portable radio station or other equipment of similar size. On the sides, the designers provided elastic bands for attaching the chemical light and highlighters. Woojin hardware in combination with velcro allow

This functional and lightweight pouch from M-Tac will allow you to operate magazines as conveniently as possible and ensure quick reloading during combat tasks. This model makes it possible to place two AR/AK-type magazines and even accommodate magazines for the Kalashnikov RPK-74. This pouch is made of Cordura 1000D - a high-quality material that is resistant to abrasion and heavy loads. The well-thought-out shape ensures reliable storage inside and protects the magazines from accidentally falling out during active movement. In this model, the designers have provided a cover flap, which, if desired, can be attached to the back of the pouch or completely removed, modifying it into an open one. With the help of velcro, the cover flap is adjustable in height which allows you to adjust it to suit the size of the magazines. The front MOLLE interface makes it possible to attach additional equipment. The sides are made of nylon webbing which ensures easy removal of magazines from the pouch. It is attached to a plate carrier or RPS using the MOLLE interface. The total volume is adjusted with the help of an elastic cord and a fastener in the lower part of the product. This M-Tac double pouch for AK with a cover will be a great addition to a fighter's individual equipment kit. Material: Cordura 1000D Features: Light and easy to use; Reliably secures magazines; The cover flap is removable, which allows you to modify the pouch into an open version; MOLLE interface. Due to its unique qualities, Cordura is widely used in tactical equipment for military, law enforcement, and special forces. It is mainly used in materials with a 1000d and 500d linear density. Linear density is the ratio between the weight of the fabric and its length. 

The M-Tac closed pouch for the M249 cartridge box (for 200 cartridges) enables you to conveniently carry and quickly use the box during combat tasks. Made of high-quality Cordura 500D material - a super-strong fabric, resistant to abrasion and high loads. The box is securely fixed with an elastic strap and a flap fastened with velcro. Inside the pouch the designers have provided nylon straps on the sides so that the box can be easily removed. Attaches to equipment using the MOLLE interface, made using Laser Cut technology. This product is not compatible with soft boxes and boxes for other models of machine guns. Material: Cordura 500D Features: Flap fastened with velcro Internal nylon straps on the sides The Molle interface is made by Laser Cut technology

M-Taс mag pouch PCC “Kolchan” was created in collaboration with Balistyka. Made of high quality Cordura 1000D material - high-strength fabric, resistant to abrasion and high loads. The side walls are inserts made of impact-resistant plastic, thanks to which the magazine is fixed. The MOLLE system is located on the front panel, which allows you to attach additional equipment. The "Quiver" RCC will provide a quick recharge and will be a great addition to the individual set of equipment for a fighter

Thanks to the unique design of the M-Tac, the flexible bag reliably protects the store, which does not fall out under any circumstances, even when parachuting and in the inverted position. But as soon as you try to take out the store, it immediately appears in your hand, because the working surface of the handle remains accessible to you when the store is in the bag. This significantly speeds up reboots and makes manipulating changes more efficient and faster. Material: Cordura 500D