Tactical vests

The M-Tac's Cuirass QRS XL Gen.II Plate Carrier is an improved model of personal body armor in the range of PLATE CARRIER . Specifically designed for the L / XL slabs. This model has a quick release system from 2M ROC Buckle fittings and is adjustable in volume. Made of high-quality Cordura 500D material, a heavy-duty fabric that resists abrasion and high loads. The inside side of the board has 3D mesh inserts that provide cushioning and air circulation. Ergonomic shoulder straps are comfortable to use and replicate the contours of the body. Skeletal Cummerbund significantly reduces the weight and allows placing pouches if needed.

The M-Tac plate carrier Cuirass QRS XL is an excellent means of individual armor protection in the PLATE CARRIER line. Developed by the brand's designers specifically for L / XL size plates. This model has a system of quick reset from the fittings 2M ROC Buckle and is adjustable in volume. Made of high quality material Cordura 500D - high-strength fabric, resistant to abrasion and high loads. On the inside of the plate there are inserts made of 3D mesh, which provide cushioning and air circulation. Ergonomic shoulder straps are easy to use and organically repeat the contours of the body. The skeletal chamber band significantly reduces the weight of the product and, if necessary, allows you to post the results. On the front of the product there is a Velcro panel with slots, for Molle system

M-Tac plate carrier Cuirass Fast XL QRS is a reliable and functional means of individual armor protection in the PLATE CARRIER line. Developed by the brand's designers for standard ESAPI (USA) Extra Large armor plates (35.5 x 28 cm). Also, with the help of internal straps, the plate carrier can be adjusted to the size of a Large plate (33.7 x 26 cm). The main feature of the FAST model is the fast-release fasteners from the 2M ROC Buckle hardware, located on the shoulder part of the plate carrier. This solution allows you to unfasten the plate holder in a matter of seconds, simply by pulling the straps in the direction of the arrows. The plate carrier is made of high-quality Cordura 500D material - an ultra-durable fabric that is resistant to abrasion and high loads. On the inside, there are 3D mesh inserts that provide cushioning and air circulation. Ergonomic shoulder straps are comfortable to use and organically follow the contours of the body. The skeleton-shaped chamber band significantly reduces the weight of the product and, if necessary, allows you to place pouches. The front of the product features a slotted Velcro panel that can be used to attach Molle-compatible gear and ID tags. At the top of the plate carrier, the designers provided a small pocket for small accessories with a moisture-proof AquaGuard zipper. This pocket is designed to store small flat items such as ID cards, keys, a lighter and other items. At the bottom of the body armor there is a quick-release module with 4 pouches that securely hold the stores. To avoid accidental ripping from the Velcro base, it is attached to the webbing on the plate carrier with Woojin carabiners. In the back there is a classic molle interface and an evacuation webbing, which in the extended position is fixed to the b

The M-Tac plate carrier Cuirass Fast QRS XL Gen.II is a new modification of an individual armor protection in the PLATE CARRIER line. Developed by the M-tac designers for standard ESAPI (USA) Extra Large armor plates (35.5 x 28 cm). Also, with the help of internal straps, the plate carrier can be adjusted to the size of a Large plate (33.7 x 26 cm). The new generation of M-Tac plate carrier Cuirass Fast QRS XL is equipped with a special Molle panel that will allow you to place pouches, holsters, first aid kits, organizers and other equipment. To avoid accidental tearing from the Velcro base, it is attached to the straps on the plate carrier with Woojin carabiners. The main feature of the FAST model is the fast-release fasteners from the 2M ROC Buckle hardware, located on the shoulder part

M-Tac plate carrier Cuirass Fast QRS is an excellent means of individual armor protection in the PLATE CARRIER line. Compatible with standard ESAPI (USA) Medium armor plates (31.8 x 24.1 cm) with chamfered upper corners. The main feature of the FAST model is the fast-release fasteners from the 2M ROC Buckle hardware, located on the shoulder part of the plate carrier. This solution allows you to unfasten the plate holder in a matter of seconds, simply by pulling the straps in the direction of the arrows. The plate carrier is made of high-quality Cordura 500D material - an ultra-durable fabric that is resistant to abrasion and high loads. On the inside, there are 3D mesh inserts that provide cushioning and air circulation. Ergonomic shoulder straps are comfortable to use.

The designers at M-Tac have developed an innovative body armor cover specifically for the 3rd Assault Brigade, taking into account the experience and needs of the military. This product has become a real legend of this war. Thanks to the soldiers of the 3rd Assault Brigade, the body armor cover has passed the test of battle and has proven to be a reliable piece of kit. The main feature of the M-TAC STURM ELITE ARMORED VEST COVER is the quick-release fastex from Duraflex, which are placed on the camberband and shoulder straps. These Fastexes belong to the premium class, due to the combination of a simplified fastening (unfastening) system, light weight and strength (withstands high loads). To fasten, place the part attached to the camberband (the upper part of the shoulder strap) into the fastex pass on the front part of the plate carrier (the lower part of the shoulder strap) and pull it until it clicks. In order to unfasten it, it is necessary to pull quickly up/down (when unfastening the fastex on the shoulder straps - to the right/left). This product is compatible with standard ESAPI (USA) armor plates; medium (31.8 x 24.1 cm), large (33.7 x 26 cm) and extra large (35.5 x 28 cm). With the help of an internal elastic band and special straps, you can easily adjust it to the size of the plate you need. Also available separately for the body armor cover is the M-TAC CLASS 1 PROTECTION CLASS 1 SOFT BALLISTIC PACKAGE KIT FOR THE STURM ARMOR VEST, consisting of three ballistic protection panels: front, back, and in the cummerbund. The body armor cover is made of high-quality Cordura 500D material - a super-strong fabric resistant to abrasion and high loads. The extended cummerbund with MOLLE interface for 4 slings allows you to carry additional equipment - for example, hori

M-TAC PLATE CARRIER CUIRASS FAST ELITE is a new evolutionary stage of individual armor protection in the PLATE CARRIER line. Compatible with standard ESAPI (USA) Medium armor plates (31.8 x 24.1 cm) with chamfered upper corners. The main feature of the ELITE model that distinguishes it from previous generations is the quick-reset fasteners from Duraflex, which are located on the cummerbund. These premium fittings combine a simplified fastening/unfastening system with light weight and high strength. In order to fasten, place the part attached to the cummerbund into the clip on the front part of the plate holder and pull until click is heard. In order to disconnect it, you just pull the toggle sharply up or down, towards yourself. The system works the same on both the left and the right-hand side. The PLATE CARRIER CUIRASS FAST ELITE is equipped with a special MOLLE panel, which allows you to easily attach additional equipment. The quick-release module with Molle interface is made using Laser Cut technology and is adjustable in height. To avoid accidental ripping from the Velcro base, it is also attached to webbing straps on the plate carrier with Woojin carabiners. In this model, the designers have lengthened the wide shoulder strap of the quick release system, making it faster and easier to remove. On the narrow end, the webbing strap was made longer, making it easier to grip the quick release system. The plate carrier is made of high-quality Cordura 500D material - a super-durable fabric resistant to abrasion and high loads. On the inside of the plate carrier there are 3D mesh inserts that provide cushioning and air circulation. The rib-like form of the cummerbund significantly reduces the weight of the product and, if necessary, allows you to place pouches. The front

The M-TAC PLATE CARRIER CUIRASS ELITE is a new evolutionary stage of individual armor protection in the PLATE CARRIER line. Compatible with standard ESAPI (USA) Medium armor plates (31.8 x 24.1 cm) with chamfered upper corners. The main feature of the ELITE model that distinguishes it from previous generations is the quick-reset fasteners from Duraflex, which are located on the cummerbund. These premium fittings combine a simplified fastening/unfastening system with light weight and high strength. In order to fasten, place the part attached to the cummerbund into the clip on the front part of the plate holder and pull until click is heard. In order to disconnect it, you just pull the toggle sharply up or down, towards yourself. The system works the same on both the left and the right-hand side. The M-TAC CUIRASS ELITE PLATE CARRIER is made of high-quality Cordura 500D - a super-durable fabric, resistant to abrasion and high loads. On the inside of the plate carrier there are 3D mesh inserts that provide cushioning and air circulation. The ergonomic shoulder straps are comfortable to use and organically follow the contours of the body. The rib-like form of the cummerbund significantly reduces the weight of the product and allows you to attach pouches, if required. The front features a slotted Velcro panel that can be used to attach MOLLE-compatible gear and ID tags. At the top of the plate holder, the designers have provided a small compartment with a moisture-proof AquaGuard zipper. This pocket is designed to store small flat items such as IDs, keys, a lighter, etc. At the bottom of the body armor there is a quick-release module with 3 pouches that can securely hold magazines. To avoid accidental ripping from the Velcro base, it is also attached to webbing straps on the

M-TAC PLATE CARRIER CUIRASS ELITE XL is a new evolutionary stage of individual armor protection in the PLATE CARRIER line. Compatible with standard ESAPI (USA) Extra Large (35.5 ? 28 ??) with chamfered upper corners.Also, with the help of internal straps, the plate carrier can be adjusted to suit a Large plate (33.7 x 26 cm). The main feature of the ELITE model that distinguishes it from previous generations is the quick-reset fasteners from Duraflex, which are located on the cummerbund. These premium fittings combine a simplified fastening/unfastening system with light weight and high strength. In order to fasten, place the part attached to the cummerbund into the clip on the front part of the plate holder and pull until click is heard. In order to disconnect it, you just pull the toggle sharply up or down, towards yourself. The system works the same on both the left and the right-hand side. The M-TAC CUIRASS ELITE PLATE CARRIER is made of high-quality Cordura 500D - a super-durable fabric, resistant to abrasion and high loads. On the inside of the plate carrier there are 3D mesh inserts that provide cushioning and air circulation. The ergonomic shoulder straps are comfortable to use and organically follow the contours of the body. The rib-like form of the cummerbund significantly reduces the weight of the product and allows you to attach pouches, if required. The front features a slotted Velcro panel that can be used to attach MOLLE-compatible gear and ID tags. At the top of the plate holder, the designers have provided a small compartment with a moisture-proof AquaGuard zipper. This pocket is designed to store small flat items such as IDs, keys, a lighter, etc. At the bottom of the body armor there is a quick-release module with 3 pouches that can securely hold magaz

M-TAC PLATE CARRIER CUIRASS FAST ELITE GEN II is a new evolutionary stage of individual armor protection in the PLATE CARRIER line. Compatible with standard ESAPI (USA) Medium armor plates (31.8 x 24.1 cm) with chamfered upper corners. The main feature of the ELITE model that distinguishes it from previous generations is the quick-reset fasteners from Duraflex, which are located on the cummerbund. These premium fittings combine a simplified fastening/unfastening system with light weight and high strength. In order to fasten, place the part attached to the cummerbund into the clip on the front part of the plate holder and pull until click is heard. In order to disconnect it, you just pull the toggle sharply up or down, towards yourself. The system works the same on both the left and the right-hand side. The PLATE CARRIER CUIRASS FAST ELITE GEN II is equipped with a special MOLLE panel, which allows you to easily attach additional equipment. The quick-release module with Molle interface is made using Laser Cut technology and is adjustable in height. To avoid accidental ripping from the Velcro base, it is also attached to webbing straps on the plate carrier with Woojin carabiners. In this model, the designers have lengthened the wide shoulder strap of the quick release system, making it faster and easier to remove. On the narrow end, the webbing strap was made longer, making it easier to grip the quick release system. The plate carrier is made of high-quality Cordura 500D material - a super-durable fabric resistant to abrasion and high loads. On the inside of the plate carrier there are 3D mesh inserts that provide cushioning and air circulation. The rib-like form of the cummerbund significantly reduces the weight of the product and, if necessary, allows you to place pouch

The M-TAC PLATE CARRIER CUIRASS ELITE is a new evolutionary stage of individual armor protection in the PLATE CARRIER line. Compatible with standard ESAPI (USA) Medium armor plates (31.8 x 24.1 cm) with chamfered upper corners. The main feature of the ELITE model that distinguishes it from previous generations is the quick-reset fasteners from Duraflex, which are located on the cummerbund. These premium fittings combine a simplified fastening/unfastening system with light weight and high strength. In order to fasten, place the part attached to the cummerbund into the clip on the front part of the plate holder and pull until click is heard. In order to disconnect it, you just pull the toggle sharply up or down, towards yourself. The system works the same on both the left and the right-hand side. The M-TAC CUIRASS ELITE PLATE CARRIER is made of high-quality Cordura 500D - a super-durable fabric, resistant to abrasion and high loads. On the inside of the plate carrier there are 3D mesh inserts that provide cushioning and air circulation. The ergonomic shoulder straps are comfortable to use and organically follow the contours of the body. The rib-like form of the cummerbund significantly reduces the weight of the product and allows you to attach pouches, if required. The front features a slotted Velcro panel that can be used to attach MOLLE-compatible gear and ID tags. At the top of the plate holder, the designers have provided a small compartment with a moisture-proof AquaGuard zipper. This pocket is designed to store small flat items such as IDs, keys, a lighter, etc. At the bottom of the body armor there is a quick-release module with 3 pouches that can securely hold magazines. To avoid accidental ripping from the Velcro base, it is also attached to webbing straps on the

The M-Tac designers are taking into account the experience and recommendations from the military, developed an innovative body armor cover specifically for the 3rd OSHBr. This product became a true legend of this war, and thanks to the soldiers of the 3rd OShBr, the body armor cover passed the battle test and proved itself as a reliable and high-quality product. The main feature of the M-TAC STURM ELITE ARMORED VEST COVER and its main difference from previous generations is the quick-release fastex from Duraflex fittings, which are placed on the cummerbund and shoulder straps. These Fastexes belong to the premium class, due to the combination of a simplified fastening (unfastening) system, light weight and strength (withstands high loads). To fasten the fastex, place the part attached to the cummerbund (the upper part of the shoulder strap) into the fastex pass on the front part of the plate carrier (the lower part of the shoulder strap) and pull it until it clicks. In order to disconnect it, it is necessary to pull sharply up/down (when unfastening the fastex on the shoulder straps - to the right/left). This product is compatible with standard ESAPI (USA) armor plates Medium (31.8 x 24.1 cm), Large (33.7 x 26 cm) and Extra Large (35.5 x 28 cm). With the help of an internal elastic band and special straps, you can easily adjust it to the size of the plate you need. Also available separately for the body armor cover is the M-TAC CLASS 1 PROTECTION CLASS 1 SOFT BALLISTIC PACKAGE KIT FOR THE STURM ARMOR VEST, consisting of three elements: front and back, as well as ballistic protection in cummerbund. The body armor cover is made of high-quality Cordura 500D material - a super-strong fabric resistant to abrasion and high loads. An extended cummerbund with a MOLLE interface